Excellent work Zee.
Your already fantastic conversion method is getting better and better. Great job and thanks for this update.
| SurroundByUs.com http://www.surroundbyus.com/sbu/ |
|
| SPEC 4.2.1 with ZAG 1.7 Discussion http://www.surroundbyus.com/sbu/viewtopic.php?f=12&t=159 |
Page 1 of 7 |
| Author: | Zeerround [ Mon Mar 29, 2010 8:59 pm ] |
| Post subject: | SPEC 4.2.1 with ZAG 1.7 Discussion |
This is the discussion thread for SPEC 4.2.1 and ZAG 1.7 The Guide and download are here: |
|
| Author: | Pl4yitLOUD [ Mon Mar 29, 2010 11:11 pm ] |
| Post subject: | Re: SPEC 4.2.1 with ZAG 1.7 Discussion |
Excellent work Zee. Your already fantastic conversion method is getting better and better. Great job and thanks for this update. |
|
| Author: | jorgeluiz [ Tue Mar 30, 2010 7:08 am ] |
| Post subject: | Re: SPEC 4.2.1 with ZAG 1.7 Discussion |
| Author: | River161 [ Tue Mar 30, 2010 7:39 am ] |
| Post subject: | Re: SPEC 4.2.1 with ZAG 1.7 Discussion |
It is my sincerest hope that you all jump in with all its got into ZAG. After several months of beta testing this, I can honestly say that this is as streamlined as the normalization process gets. Both newbie and experienced user alike are going to be in heaven. I also highly encourage those who have been a bit gunshy with ArcTan to give 4.2 a shot. The controls here are very impressive and will give you a lot more control over your sound. Many folks have begun their exploration of work with SPEC-CC. My hope is that you all continue to move beyond that and really explore what the package has to offer. Best of luck to you all! I want to hear success stories! 
|
|
| Author: | Murphman [ Wed Mar 31, 2010 4:58 am ] |
| Post subject: | Re: SPEC 4.2.1 with ZAG 1.7 Discussion |
Hello I installed the pkg yesterday and have no red boxes. After I use track-time 6.5 for a 2 song wav, I load it, with ZAG at measure levels, hit play and it looks like it is measuring RMS levels. When album is done I turn off, change ZAG to apply and here I see the following – any suggestions? Same results on Vista and XP. |
|
| Author: | River161 [ Wed Mar 31, 2010 6:20 am ] |
| Post subject: | Re: SPEC 4.2.1 with ZAG 1.7 Discussion |
Murphman.....do you have a screenshot of the top window where you enter the values from TT6.5? I'd want to see that. It happens sometimes due to just regular software temperament, a long silence at the start of a track which causes it not to acknowledge the track, or some issue with how the TT values are added in. i've never encountered a situation where you couldn't get it to work, though, and have now used this on a large number of conversions. give us a screenshot but, also, restart Plogue and try the process again and see if it works. |
|
| Author: | Murphman [ Wed Mar 31, 2010 6:49 am ] |
| Post subject: | Re: SPEC 4.2.1 with ZAG 1.7 Discussion |
Sorry about that here is the screenshot. Below is screenshot - restarting Plogue; restarting computers haven't had an affect on results |
|
| Author: | Zeerround [ Wed Mar 31, 2010 7:53 am ] |
| Post subject: | Re: SPEC 4.2.1 with ZAG 1.7 Discussion |
I'll look at this tonight. It's possible I may have introduced a problem with a last minute change. In the meantime, you could pull Zag1.7.1.dll out of your plugins folder and put in the attached. If that fixes it, my bad. |
|
| Author: | Murphman [ Wed Mar 31, 2010 2:40 pm ] |
| Post subject: | Re: SPEC 4.2.1 with ZAG 1.7 Discussion |
ZAG 1.7 is working on both Vista and XP Thank you - this is much easier and I think, with ArcTan I am making better surrounds. Thanks again to the entire community. |
|
| Author: | River161 [ Wed Mar 31, 2010 3:27 pm ] |
| Post subject: | Re: SPEC 4.2.1 with ZAG 1.7 Discussion |
| Page 1 of 7 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|