Writing at the same time as Fan51....
| SurroundByUs.com http://www.surroundbyus.com/sbu/ |
|
| SPEC 4.0 with AutoV2 Automation (Discussion) http://www.surroundbyus.com/sbu/viewtopic.php?f=12&t=42 |
Page 4 of 5 |
| Author: | Murphman [ Fri Jan 08, 2010 5:21 am ] |
| Post subject: | Re: SPEC 4.0 with AutoV2 Automation (Discussion) |
I am running Vista Ultimate 64-bit I ran bat file as admin and it returned the following; E:\001_music\JamesBrown The system cannot find the path specified. * ******** Preset "Lengths_Gains.bprs" was created successfully * Press any key to continue . . . I re-searched for the .bprs file and cannot find. It is not in Plogue and I can’t find on anywhere on my computer… hmmm |
|
| Author: | River161 [ Fri Jan 08, 2010 5:41 am ] |
| Post subject: | Re: SPEC 4.0 with AutoV2 Automation (Discussion) |
| Author: | Murphman [ Fri Jan 08, 2010 7:41 am ] |
| Post subject: | Re: SPEC 4.0 with AutoV2 Automation (Discussion) |
Right on - I'm getting closer - a man on a mission I have both .xls and .csv in same file as .mid files. I just tried again with entire folder moved to c: - same batch report as before - can't find specified path with statement .bprs was created successfully - but where? |
|
| Author: | Murphman [ Fri Jan 08, 2010 1:53 pm ] |
| Post subject: | Re: SPEC 4.0 with AutoV2 Automation (Discussion) |
Success - I moved from the Vista machine to an older XP - ran the AutoV2 and preset was written to Bidule. Sort of bitter sweet - my Vista machine much faster but at least now the batch file works. If there is a fix for Vista I'd like to know but maybe its time to go to 7.0. Thanks for the help. |
|
| Author: | River161 [ Fri Jan 08, 2010 4:33 pm ] |
| Post subject: | Re: SPEC 4.0 with AutoV2 Automation (Discussion) |
| Author: | Jack [ Fri Jan 08, 2010 10:04 pm ] |
| Post subject: | Re: SPEC 4.0 with AutoV2 Automation (Discussion) |
| Author: | River161 [ Sat Jan 09, 2010 6:52 am ] |
| Post subject: | Re: SPEC 4.0 with AutoV2 Automation (Discussion) |
Jack.....I've also had the issues, though, with the "Lengths_Gains" preset not showing up, though, after running the bat file. Just happened to me last night with Win7 until I deleted the old one that was sitting there from my last conversion and refreshed the folder. However, I'm beginning to think this may have begun when I upgraded the "Gainslist" bat file to version 6A from the previous version, since I now remember some strangeness in my final days with Vista. Perhaps there's some compatibility issue that both myself and Murphman are having that's specific to this version, as this had never happened before I dl'ed the latest version on here. Hang in there, Murphman. As you can see, you've got several of us working on a solution. |
|
| Author: | Fan51 [ Sat Jan 09, 2010 8:28 am ] |
| Post subject: | Re: SPEC 4.0 with AutoV2 Automation (Discussion) |
| Author: | Pl4yitLOUD [ Sat Jan 09, 2010 8:36 am ] |
| Post subject: | Re: SPEC 4.0 with AutoV2 Automation (Discussion) |
| Author: | Pl4yitLOUD [ Sat Jan 09, 2010 8:37 am ] |
| Post subject: | Re: SPEC 4.0 with AutoV2 Automation (Discussion) |
Writing at the same time as Fan51....
|
|
| Page 4 of 5 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|